Questions About Kitchen Remodeling
Should I put an argon mitigation system in my kitchen crawlspace?
I am remodeling our kitchen. It has been gutted. The size is 15'6"x15'3". It is built over a crawlspace. Should I put a Argon Mittigation System in my kitchen crawlspace?
Drop-in Undermount Sinks
I like the simplicity of a drop-in sink since it would be easier to install than the other models. We're remodeling the kitchen and my spouse wants an under-mount. She hates the idea of food getting trapped in the edge of the drop-sink we have in the kitchen now. Can you find under-mount sinks that are comparable in durability as a drop-in?
Warranties on Solid Surface Counters
We shopped solid surface countertops for our Sacramento kitchen remodeling project and it doesn't seem like a do-it-yourself job. The clerk at the home remodeling store said you can crack open a counter with a stress riser. Can you buy countertops with warranties against stress risers?
Costs for Venetian Plaster Kitchen Painting
Since I saw a Texas showroom house with Venetian Plaster, I've wanted it in my kitchen. Painting is not my hubby's forte, though, and I never worked with plaster. Do you just put it on with a trowel and sandpaper it after it dries? Is there a way to use it on a test surface to see if I'm up to it?
Thermofoil Kitchen Cabinets
I hadn't heard of thermofoil kitchen cabinets until recently. I know it's measured in the linear foot. Are there standardized grades of kitchen cabinet veneer and laminates? I'm looking for the middle range for each option for starters. Are they a good choice here in Milwaukee?
Costs and Workmanship for a New Kitchen Backsplash
I'm checking out the costs and workmanship for a new kitchen backsplash and wonder if the picture-frame or sheet mounted backsplashes are good for the money. I can always change later to a glue and grout setup. I'm afraid of getting stuck with something bad for a long time that I spent a fortune getting done.
Crown Molding in Our Remodeled Kitchen
We remodeled the kitchen in our Washington state home, and it's time to replace damaged crown molding. I'd like to install it around the edges of the cabinets, but I can't get the angles right. Should all the pieces be cut in a miter box?
Cost of Repairing Kitchen Laminate Counters in New Jersey
I'm not willing to spend money on new laminate kitchen countertops, but there are some chips around the sink that are really annoying. I think I can take out the smaller chips with laminate polish. For the larger ones, how do you find the putty that matches older laminate counter colors? What's the cost of patching vs the cost of refinishing them?
Small Kitchen Addition Appliances
I want to put in a small kitchen as a home addition this year. We have a separate room that we're making into an apartment and a galley kitchen will fit okay. The problem is we can't find mid-range appliances in Allentown that aren't too expensive. It's either a Rolls Royce or a cookplate. I'm looking at a built-in convection oven, dishwasher, and microwave. Have any suggestions?
The Cost of Faux Finishes for Kitchen Walls
We're halfway through our kitchen remodeling and are choosing the paint. Since it's a Tuscany kitchen, I'd like a faux finish for the painting. Rag rolling is supposed to be relatively simple with one or two glazes. Does it take a crew to paint the kitchen this way? I hear you need at least one painter and one rag roller to work together. If I decide to contract it out, what's the hourly cost here in Richmond?
Check out some of these popular projects in your your neighborhood:
Recent Comments:
- Waldo Evensen wrote:
I comment each time I especially enjoy a post on a blog or I have something to v… - Roulette online gambling blackjack slots casino wrote:
tvsousfmjbcmfsfnpefmfs, No lim… - Online poker tournament wrote:
ivpzhsfmjbcmfsfnpefmfs, … - gluten free diet weight loss wrote:
Observed your article really appealing in fact. I really enjoyed studying it and… - Mandy wrote:
good to know! every homeowner should read this!… - Paraschiv Lucian wrote:
Just saying thanks for this I'm not sure I'll be updating all my friends on Fac…
Categories
